Demonstration of PBM6 PC Speaker support. 
Using the Morse Code to tell screen text.

Welcome sound when PBM6 is ready to use. 

In the main menu, you hear two chars as short information for the menu entry.
For boot entries, the first char is the drive type. The second char is the bus type. There are also short version for static menu entries like Setup.

Here, the first menu entry, is a hard disk IDE. In short, HI.

Pressing POS1 to hear first menu entry. 

MORSE CODE: .... ..

With a hotkey, you get the menu entry text.

Here it is, "Drive 1 HD IDE".

MORSE CODE: -.. .-. .. ...- . / .---- / .... -.. / .. -.. .

Moving down to the next menu entry. 
Hard disk, SATA.

MORSE CODE: .... ...

Moving down to the next menu entry. 
CD, SATA.

MORSE CODE: -.-. ...

Moving down to the next menu entry. 
Hard disk, USB.

MORSE CODE: .... ..-

Moving down to the next menu entry. 
Setup. 

MORSE CODE: ... .

Moving down to the next menu entry. 
About. 

MORSE CODE: .- -...

Moving down to the next menu entry. 
Shutdown. 

MORSE CODE: ... ....

Beside the Morse code, there are additional sounds.
Attaching an USB drive. 
Removing an USB drive. 


There is also an own sound for the boot countdown.

Experienced users can use the Morse code with more speed. 
Listen now the codes with more speed.
Pressing POS1 for the first menu entry and moving down to the USB hard disk entry.

MORSE CODES


Please note, the sounds may change in further releases. Thanks for your time. 
